ITCertKing have a professional IT team to do research for practice questions and answers of the Juniper JN0-343 exam certification exam. They provide a very effective training tools and online services for your. If you want to buy ITCertKing products, ITCertKing will provide you with the latest, the best quality and very detailed training materials as well as a very accurate exam practice questions and answers to be fully prepared for you to participate in the Juniper certification JN0-343 exam. Safely use the questions provided by ITCertKing's products. Selecting the ITCertKing is equal to be 100% passing the exam.
ITCertKing is the leader in the latest Juniper JN0-343 exam certification and exam preparation provider. Our resources are constantly being revised and updated, with a close correlation. If you prepare Juniper JN0-343 certification, you will want to begin your training, so as to guarantee to pass your exam. As most of our exam questions are updated monthly, you will get the best resources with market-fresh quality and reliability assurance.
Having Juniper certification JN0-343 exam certificate is equivalent to your life with a new milestone and the work will be greatly improved. I believe that everyone in the IT area is eager to have it. A lot of people in the discussion said that such a good certificate is difficult to pass and actually the pass rate is quite low. Not having done any efforts of preparation is not easy to pass, after all, Juniper certification JN0-343 exam requires excellent expertise. Our ITCertKing is a website that can provide you with a shortcut to pass Juniper certification JN0-343 exam. ITCertKing have a training tools of Juniper certification JN0-343 exam which can ensure you pass Juniper certification JN0-343 exam and gain certificate, but also can help you save a lot of time. Such a ITCertKing that help you gain such a valuable certificate with less time and less money is very cost-effective for you.
Since Juniper JN0-343 certification is so popular and our ITCertKing can not only do our best to help you pass the exam, but also will provide you with one year free update service, so to choose ITCertKing to help you achieve your dream. For tomorrow's success, is right to choose ITCertKing. Selecting ITCertKing, you will be an IT talent.
Exam Code: JN0-343
Exam Name: Juniper (Juniper Networks Certified Internet Specialist (JNCIS-ENT))
One year free update, No help, Full refund!
Total Q&A: 393 Questions and Answers
Last Update: 2013-11-26
ITCertKing can provide you with a reliable and comprehensive solution to pass Juniper certification JN0-343 exam. Our solution can 100% guarantee you to pass the exam, and also provide you with a one-year free update service. You can also try to free download the Juniper certification JN0-343 exam testing software and some practice questions and answers to on ITCertKing website.
ITCertKing's Juniper certification JN0-343 exam testing exercises is very similar with real exam questions. If you choose ITCertKing's testing practice questions and answers, we will provide you with a year of free online update service. ITCertKing can 100% guarantee you to pass the exam, if you fail to pass the exam, we will full refund to you.
ITCertKing Juniper JN0-343 exam questions are made in accordance with the latest syllabus and the actual Juniper JN0-343 certification exam. We constantly upgrade our training materials, all the products you get with one year of free updates. You can always extend the to update subscription time, so that you will get more time to fully prepare for the exam. If you still confused to use the training materials of ITCertKing, then you can download part of the examination questions and answers in ITCertKing website. It is free to try, and if it is suitable for you, then go to buy it, to ensure that you will never regret.
JN0-343 Free Demo Download: http://www.itcertking.com/JN0-343_exam.html
NO.1 Click the Exhibit button.
Based on the exhibit, in which spanning-tree state would the indicated port be.?
A. listening
B. learning
C. forwarding
D. blocking
Answer: C
Juniper exam dumps JN0-343 pdf JN0-343 demo JN0-343 exam prep JN0-343 exam prep
NO.2 Configuring bpdu-timeout-action enables which protection mechanism?
A. root protection
B. BPDU protection
C. loop protection
D. RSTP protection
Answer: C
Juniper JN0-343 JN0-343 JN0-343
NO.3 Which OSPF area type can contain Type 7 LSAs?
A. backbone
B. not-so-stubby
C. stub
D. totally stubby
Answer: B
Juniper exam JN0-343 JN0-343
NO.4 Which statement describes the default Junos OS behavior for OSPF?
A. External LSAs are advertised in a stub area.
B. An ABR does not announce a default route into a stub area.
C. Stub area internal routers generate a default route.
D. Only totally stubby areas need a default route.
Answer: B
Juniper JN0-343 JN0-343 dumps JN0-343
NO.5 An administrator finds that traffic from a large file download over an HTTP session is not load-balanced
across multiple links in a LAG. What is the possible cause?
A. Per-packet load-balancing is not configured.
B. The redundant path has a different IGP metric.
C. The hash key is not configured in the forwarding-options stanza.
D. This is the expected behavior.
Answer: D
Juniper braindump JN0-343 JN0-343 study guide JN0-343 JN0-343
NO.6 Which protocol is an IGP?
A. LACP
B. STP
C. OSPF
D. PAGP
Answer: B
Juniper JN0-343 certification JN0-343
NO.7 Which BGP attributes are listed in the correct route selection order?
A. local preference, AS path, origin, MED
B. local preference, MED, AS path, origin
C. AS path, local preference, origin, MED
D. MED, origin, local preference, AS path
Answer: A
Juniper JN0-343 certification JN0-343 exam dumps JN0-343 test JN0-343 original questions
NO.8 What is the default behavior of a trunk port when it receives transit traffic without a VLAN tag?
A. It drops the traffic.
B. It forwards the traffic.
C. It tags the transit traffic with lowest VLAN ID permitted on the trunk.
D. It tags the transit traffic with highest VLAN ID permitted on the trunk.
Answer: A
Juniper demo JN0-343 braindump JN0-343
NO.9 Which routing-instance type allows the sharing of interface routes and the support features used in
source-based routing?
A. virtual-router
B. vrf
C. forwarding
D. multi-instance
Answer: C
Juniper braindump JN0-343 JN0-343 braindump
NO.10 When processing inbound Ethernet frames, which firewall filter is evaluated first by an EX Series
switch?
A. port filter
B. VLAN filter
C. trunk filter
D. route filter
Answer: A
Juniper JN0-343 test JN0-343 JN0-343 dumps
NO.11 Which configuration correctly sets interface ge-0/0/4 in trunk mode, carrying VLANs v10 and v20?
A. ge-0/0/4 {
unit 0 {
family ethernet-switching {
vlan {
members [ v10 v20 ];
}
} } }
B. ge-0/0/4 {
unit 0 {
family ethernet-switching {
port-mode trunk;
vlan {
members [ v10 v20 ];
}
}
}
}
C. ge-0/0/4 {
vlan-tagging;
unit 0 {
family ethernet-switching {
port-mode trunk;
vlan {
members [ v10 v20 ];
}
}
}
}
D. ge-0/0/4 {
unit 10 {
family ethernet-switching;
}
unit 20 {
family ethernet-switching;
}
}
Answer: B
Juniper JN0-343 demo JN0-343 test answers JN0-343 braindump
NO.12 Which of the following is enabled by default on an EX Series switch?
A. MAC move limiting
B. storm control
C. IP source guard
D. dynamic ARP inspection
Answer: B
Juniper JN0-343 JN0-343 exam dumps
NO.13 What are two valid BPDU types? (Choose two.)
A. topology change notification
B. configuration change
C. configuration
D. root bridge
Answer: A,C
Juniper test questions JN0-343 exam prep JN0-343
NO.14 Which two OSPF LSA types can be used to advertise routes between areas? (Choose two.)
A. router
B. network
C. external
D. summary
Answer: C,D
Juniper JN0-343 study guide JN0-343 study guide
NO.15 Which two of the following are functions of the BGP update message? (Choose two.)
A. It withdraws routes that are no longer valid.
B. It notes that an unsupported option is detected from the open message.
C. It transports routing information between BGP peers.
D. It readvertises routes that have already been sent and acknowledged.
Answer: A,C
Juniper JN0-343 JN0-343 test questions JN0-343 answers real questions
NO.16 Which two pieces of information are communicated by IS-IS TLVs? (Choose two.)
A. network protocols supported
B. designated router priority
C. authentication key
D. PDU Length
Answer: A,C
Juniper JN0-343 JN0-343 practice test JN0-343 certification training JN0-343 answers real questions JN0-343
NO.17 Which configuration summarizes external routes in the 172.16.0.0/22 range into a single prefix on an
ABR for Area 1?
A. protocols { ospf { area 0.0.0.1 {
nssa {
default-lsa {
default-metric 1;
metric-type 1;
}
}
area-range 172.16.0.0/22;
}
}
}
B. protocols {
ospf {
area 0.0.0.1 {
nssa {
area-range 172.16.0.0/22;
}
}
}
}
C. protocols {
ospf {
area 0.0.0.1 {
stub summaries;
}
}
}
D. protocols {
ospf {
area 0.0.0.1 {
nssa;
area-range 172.16.0.0/22 restrict;
}
}
}
Answer: B
Juniper exam dumps JN0-343 JN0-343 test
NO.18 Which three statements correctly describe the default BGP advertisement behavior in the Junos OS?
(Choose three.)
A. Routes learned through EBGP are advertised to IBGP peers.
B. Routes learned through EBGP are advertised to other EBGP peers.
C. Routes learned through IBGP are advertised to other IBGP peers.
D. Routes learned through IBGP will be advertised to EBGP peers.
E. Routes learned through an IGP are automatically advertised to EBGP peers.
Answer: A,B,D
Juniper JN0-343 JN0-343 braindump JN0-343 test questions
NO.19 Which of the following can be used for both security and loop prevention?
A. firewall filters
B. DHCP snooping
C. dynamic ARP inspection D. MAC move limiting
Answer: D
Juniper JN0-343 demo JN0-343
NO.20 How much overhead does the GRE header add to an IPv4 packet?
A. 24 bytes
B. 32 bytes
C. 48 bytes
D. 64 bytes
Answer: A
Juniper JN0-343 certification JN0-343 study guide JN0-343 JN0-343 test answers
NO.21 Which configuration disables a port when more than 30,000 Kbps of broadcast traffic is received over
an aggregated Ethernet interface with two member links?
A. Option A
B. Option B
C. Option C
D. Option D
Answer: C
Juniper certification JN0-343 pdf JN0-343 JN0-343
NO.22 Which statements are true about graceful Routing Engines switchover (GRES)?
A. Configuration on both Routing Engines must be synchronized.
B. The backup Routing Engine cannot be managed through IP address because RPD does not run on
backup the Routing Engine.
C. Different hostnames must be configured on both Routing-Engines.
D. Both Routing-Engines are managed through a single out-of-band-management IP address.
Answer: A
Juniper JN0-343 study guide JN0-343
NO.23 When loop protection is enabled on an interface, what happens when the port stops receiving BPDUs?
A. The port is placed in a loop-inconsistent role.
B. The port is placed into listening mode.
C. The port is transitioned into a forwarding state.
D. The interface is disabled.
Answer: A
Juniper JN0-343 JN0-343 JN0-343 study guide
NO.24 Given the following output, what has been configured for the 192.168.3.0/24 prefix?
A. per-flow load balancing
B. a floating static route
C. per-packet load balancing
D. a qualified next hop
Answer: A
Juniper JN0-343 JN0-343 certification JN0-343 pdf
NO.25 Which OSPF LSA type is sent by all routers in an area to advertise its connected subnets?
A. router
B. network
C. external
D. summary
Answer: A
Juniper demo JN0-343 test questions JN0-343
NO.26 Which Junos command correctly configures the ge-0/0/0.0 interface to operate only for IS-IS Level 2?
A. set interfaces ge-0/0/0.0 family iso level 2 enable
B. set interfaces ge-0/0/0.0 family iso level 1 disable
C. set protocols isis interface ge-0/0/0.0 level 2 enable
D. set protocols isis interface ge-0/0/0.0 level 1 disable
Answer: D
Juniper certification JN0-343 JN0-343 JN0-343
NO.27 Which command correctly assigns AS 65432 as the local router's autonomous system?
A. set protocols bgp local-as 65432
B. set routing-options local-as 65432
C. set protocols bgp autonomous-system 65432
D. set routing-options autonomous-system 65432
Answer: D
Juniper practice test JN0-343 JN0-343 JN0-343 certification
NO.28 What is the minimum configuration necessary to create two VLANs and two operational RVIs?
A. Option A
B. Option B
C. Option C
D. Option D
Answer: B
Juniper JN0-343 test questions JN0-343
NO.29 What is the correct sequence of OSPF adjacency formation?
A. Down, Init, ExStart, 2way, Loading, Exchange, Full
B. Down, 2way, Init, ExStart, Exchange, Loading, Full
C. Down, Init, 2way, ExStart, Exchange, Loading, Full
D. Down, Init, 2way, Loading, ExStart, Exchange, Full
Answer: C
Juniper JN0-343 JN0-343 dumps JN0-343 certification
NO.30 In the following output, what does the asterisk indicate?
A. The interface is configured as a trunk.
B. The interface is configured for spanning-tree protocol.
C. The interface is active.
D. The interface is inactive.
Answer: C
Juniper test JN0-343 answers real questions JN0-343 JN0-343 exam prep JN0-343
ITCertKing offer the latest VCP-510 exam material and high-quality HP3-C33 pdf questions & answers. Our 000-283 VCE testing engine and 000-124 study guide can help you pass the real exam. High-quality FCNSA.v5 dumps training materials can 100% guarantee you pass the exam faster and easier. Pass the exam to obtain certification is so simple.
Article Link: http://www.itcertking.com/JN0-343_exam.html
没有评论:
发表评论